ANU Open Research Repository will be unavailable 8am-9am on Tuesday 13th August 2024 due to scheduled maintenance.
 

Investigation of nanoporous carbon powders produced by high energy ball milling and formation of carbon nanotubes during subsequent annealing

Simple item page
dc.contributor.authorChen, Ying
dc.contributor.authorFitz Gerald, John
dc.contributor.authorChadderton, Lewis
dc.contributor.authorChaffron, Laurent
dc.date.accessioned2015-12-13T23:34:54Z
dc.date.available2015-12-13T23:34:54Z
dc.date.issued1999
dc.date.updated2015-12-12T09:37:52Z
dc.description.abstractNanoporous structure was found in graphite samples after ball milling at ambient temperature. The internal micropore surface area, as determined using the T-plot method, was found to vary during milling, in association with phase transformations of the graphite. Structural changes from hexagonal to turbostratic, and to amorphous phases were observed and investigated using X-ray diffraction analysis and transmission electron microscopy. Carbon nanotubes were obtained by the annealing of the milled samples at 1400°C for 6 hours in nitrogen gas.
dc.identifier.issn1422-6375
dc.identifier.urihttp://hdl.handle.net/1885/93664
dc.publisherTrans Tech Publications
dc.sourceJournal of Metastable and Nanocrystalline Materials
dc.subjectKeywords: Annealing; Ball milling; Crystal structure; Nanotubes; Phase transitions; Porosity; Powders; Temperature; Transmission electron microscopy; X ray diffraction analysis; Amorphous phases; Carbon nanotubes; Hexagonal; Internal micropore surface area; Nanopor
dc.titleInvestigation of nanoporous carbon powders produced by high energy ball milling and formation of carbon nanotubes during subsequent annealing
dc.typeJournal article
local.bibliographicCitation.lastpage380
local.bibliographicCitation.startpage375
local.contributor.affiliationChen, Ying, College of Physical and Mathematical Sciences, ANU
local.contributor.affiliationFitz Gerald, John, College of Physical and Mathematical Sciences, ANU
local.contributor.affiliationChadderton, Lewis, College of Physical and Mathematical Sciences, ANU
local.contributor.affiliationChaffron, Laurent, CEA-Saclay F-91191
local.contributor.authoremailu8001315@anu.edu.au
local.contributor.authoruidChen, Ying, u9800982
local.contributor.authoruidFitz Gerald, John, u8001315
local.contributor.authoruidChadderton, Lewis, u1809603
local.description.notesImported from ARIES
local.description.refereedYes
local.identifier.absfor100799 - Nanotechnology not elsewhere classified
local.identifier.ariespublicationMigratedxPub25052
local.identifier.citationvolume2-6
local.identifier.scopusID2-s2.0-2442757234
local.identifier.uidSubmittedByMigrated
local.type.statusPublished Version

Files

Collections

ANU Research Publications

DSpace software copyright © 2002-2024 LYRASIS