Characterisation of the thermal response of Silver® cells and modules
Date
Authors
Everett, V
Babaei, Jafar
Deenapanray, P. N. K
Weber, K. J
Stocks, Matthew
Blakers, Andrew
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Sliver cells, invented and developed at The Australian National University, are long, thin, narrow, and bifacial. They are constructed from high-grade mono-crystalline silicon. Solar modules that incorporate Sliver cells are significantly different in their construction and performance characteristics to conventional crystalline silicon modules. In Sliver modules, the cells are usually spaced apart to make use of the bifacial nature of the Sliver cells. A scattering reflector on the rear of the module is used to trap most of the incident light within the module structure. However, a fraction of the incident sunlight will not be absorbed by the cells and will instead be coupled out of the module. While this loss of incident radiation results in a reduction in module efficiency, it also results in a proportional reduction in heat generation within the module. This leads to lower module operating temperatures compared with conventional modules of similar efficiencies.
Description
Keywords
bifacial, performance, thermalperformance
Citation
Collections
Source
Type
Conference paper